SI-W509

5 Channels Digital Input and 6 Channels Relay Output Remote I/O Module

Features

  • 5 Channels Digital input
  • 4 Channels Power Relay output and 2 Channels Signal Relay output
  • All Digital input channels can be used as 32 bit counters
  • Support over voltage protection
  • Support standard Industrial communication protocol
  • Support wide operating temperature -25°C ~ 75°C
  • Support wide-ranged voltage DC In (9~50V)
System
Communication Interface
RS-485
Baud Rate
9600 bps ~ 115,200 bps (Max)
Communication Protocol
Modbus / RTU
Intra-module Isolation
3000V
Installation
DIN-Rail or Wall Mount
LED Indicator
Power LED, Green
R/W LED, Orange
Error LED, Red
Modbus LED, Green
I²C Interface
Temperature/ Humidity sensor module
Power Supply
9 ~ 50VDC In from terminal block
System Weight
220 g
Dimensions (W x H x D)
115 x 90 x 39 mm
Certification
FCC / CE
I/O Ports
Digital Input /Counter
Channels
5
Type
Wet Contact, Sink / Source
On Voltage Level
Wet Contact, +3.5 ~ +50VDC
Off Voltage Level
Wet Contact, +1VDC Max.
Input Impedance
10KΩ, 0.5W
Counter
Channels : 8
Max. Count : 32 bits (0~4,294,967,285)
Max. Input Frequency : 50Hz
Min. Pulse Width : 10ms
Overvoltage Protection
70VDC
Power-on Value
Yes
Signal Relay Output (Form A)
Channels
2
Contact Rating
2A @ 30VDC
0.24A @ 220VDC
0.25A @ 250VAC
Max. Load Current
700mA/channel
Min. Contact Load
10mA @ 20mV
Contact Material
AgNi, Gold-covered
Operation Time
3ms (typical)
Release Time
4ms (typical)
Mechanical Endurance
10⁸ ops
Electrical Endurance
2 x 10⁵ ops
Power Relay Output (Form A)
Channels
4
Contact Rating
6A @ 35VDC
6A @ 240VAC
Max. Load Current
700 mA/channel
Min. Contact Load
100mA @ >= 12V
Contact Material
AgNi 90/10
Operation Time
5 ms (typical)
Release Time
1 ms (typical)
Mechanical Endurance
30 x 10⁶ ops
Electrical Endurance
1 x 10⁵ ops
Power-on Value
Yes
Environment
Operating Temp.(Ambient with airflow)
-25°C~75°C (-13°F~167°F)
Storage Temperature
-20°C~80°C (-4°F~176°F)
Humidity
20%~90%

License Agreement

The terms of the software license agreement included with any software you download will control your use of the software.

PROTECH SOFTWARE LICENSE AGREEMENT
IMPORTANT – PLEASE READ THIS CAREFULLY. BY COPYING, INSTALLING OR USING ALL OR ANY PORTION OF THIS SOFTWARE, YOU ACCEPT ALL TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, YOU ARE NOT ENTITLED TO USE THE SOFTWARE.

SITE LICENSE. You may copy the Software onto your organization's computers for your organization's use, and you may make a reasonable number of back-up copies of the Software for security purposes, subject to these conditions:

1. The Software is licensed for use only in conjunction with Protech component products. Use of the Software in conjunction with non- Protech component products is not licensed hereunder.

2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software.

3. You may not reverse engineer, decompile, or disassemble the Software.

4. You may not use the Software to develop other software.

5. You may not sub-license or permit simultaneous use of the Software by more than one user.

6. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Protech or its suppliers. The Software is copyrighted and licensed to you by Protech and relevant third parties.

7. Protech may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly set forth herein, Protech grants no express or implied right to you under any of Protech’s patents, copyrights, trademarks, or other intellectual property rights.

In order to optimize our website for you and to be able to continuously improve it, we use cookies. By continuing to use the website, you agree to the use of cookies. More information on cookies can be found in our privacy policy